January 10, 2025

Is Varmala Preservation in Epoxy as Simple as Seen on Youtube

If you ever looked for videos on YouTube for preserving Varmala, then you must have come across thousands of tutorials which state that this is a very easy and simple procedure. All it requires is two chemicals, mixed together, and voilà! Your varmalas are perfectly preserved in epoxy resin!

Sounds simple and easy, right? That might make you think, “Why do professional artists charge so much for preserving a varmala if it is really that easy?”

But is Varmala preservation really that easy? If you think it is, then this blog is for you. Stay with me, and by the end, you will know why this process requires a lot more expertise than just mixing a couple of chemicals.

The Truth Behind Varmala Preservation

Preserving varmala in epoxy is not a simple mixing of two chemicals. Although it seems to be a simple procedure, it actually requires a lot of care, attention, and skill. Let’s break it down as to why:

1. Selecting the Right Epoxy Resin

Not all epoxy resins are created equal. While some are designed for general use, others are specially designed to preserve delicate flowers such as those used in a varmala. Using the wrong type of resin may result in poor preservation, discolouration, or even brittleness over time.

Professional artists know which resin is best suited for the flowers and how to mix it for a flawless finish.

2. Readying the Varmala for Preservation

Flowers need to be prepared before pouring resin over them. Such flowers in a varmala are usually fragile, and the process of drying them without damaging their natural beauty is a bit tricky.

Drying flowers for preservation is not as simple as letting them dry in the sun or pressing them between sheets of paper. It is all about finding a balance of time, temperature, and humidity control for them to dry well.

3. Mixing the Epoxy Resin

There are two parts that constitute epoxy resin: a resin and a hardener. The mixture must be combined in accurate proportions so that the mixture cures correctly. Too much hardener or too little will affect the clarity and durability of the resin.

Professional artists know how to mix the chemicals well so that there are no bubbles or flaws, thus allowing it to cure correctly. If you’re curious, you can even check Instagram profile of Kavita Dadhich, a trusted resin artist, to see expert results.

4. The Pouring Process

Pouring the resin over the varmala flowers requires accuracy. If not done correctly by pouring slowly in the right amount, the flowers may shift or get submerged unevenly. The resin must be done in layers, with each layer cured before the next is added.

This ensures the flowers do not float on the surface or sink into the mixture. It requires patience and careful handling so that nothing moves.

5. Curing Time and Environment

Curing epoxy resin requires time. Depending on the thickness of the pour, it may take anywhere from 24 to 48 hours. The environment where the resin is cured is also critical. Too much humidity, dust, or temperature fluctuations may cause problems with the curing process, and these imperfections may remain.

Expert artists know the right conditions for curing and how to avoid such problems to get a good quality finish.

6. Finishing Touches and Polishing

Once the epoxy has cured, the work is not yet done. The final piece needs to be carefully removed from its mold, and any excess resin or rough edges must be sanded and polished.

This is where the true artistry comes in. Professionals know how to handle the resin without damaging the piece, and they have the tools needed to give it a beautiful, smooth finish. Without this final step, your varmala preservation may look unfinished or unprofessional.

Why Hiring a Professional is Essential

So, is it as simple to preserve varmala in epoxy as it is on YouTube? Not at all. While this might look like a simple DIY project, there are numerous complexities. From choosing the right materials to the perfect finish, every step requires skill and experience.

VarmalaPreservation.com- a professional varmala preservation company in India, has been trained for such challenges so that your varmala is preserved not only for years but also looks beautiful and lasts for years.

Hiring their resin artist for varmala preservation art means hiring quality. Their knowledge of such delicate flowers gives them the finesse to create the perfect shape, and handling the resin becomes a piece of cake with tools and expertise backing them up, making the product a timeless remembrance of how beautiful your big day was.

And yes, if you’re wondering, do I get online calling support during my varmala preservation order? Rest assured, their professionals provide excellent communication to ensure you’re satisfied with every step.

Conclusion

So, the next time you hear about preserving your varmala in epoxy, remember that it isn’t just mixing up chemicals. There is craftsmanship to it; it is all a matter of having attention to every detail and requires a lot of experience that just a professional artist can provide for you.

Drop us a note at varmalapreservation.com for your best professional services in varmala preservation. Let us create beautiful memories!